Daboo

Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder

by
Daboo
Follow
Follow
Remix Model
glittalogik
glittalogik
|
|
Image 9 of 9
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder - My first Multiboard accessory! Prints super easy and attaches to the board with 2x https://than.gs/m/974363 - 3d model
glittalogik
glittalogik
|
|
Image 9 of 9
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder - My first Multiboard accessory! Prints super easy and attaches to the board with 2x https://than.gs/m/974363 - 3d model
2D
3D
Makes
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder 3d model
Multiboard Dual Flush Cutter, Needlenose Plier, Wire Stripper, and more Holder - My first Multiboard accessory! Prints super easy and attaches to the board with 2x https://than.gs/m/974363 - 3d model

The Multiboard Dual Flush Cutter Holder is suitable for holding Flush Cutters, Needlenose Pliers, Wire Strippers, or other small tools.

The inner cavity measures 50mm x 15mm (~1.97" x 0.6").

Print upside down with no supports at 0.2mm layer height with three walls for optimal strength.

Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.


109 Likes1.1K DownloadsJanuary 6, 2024



109 Likes1.1K DownloadsJanuary 6, 2024